Book Appointment

 

What're your opinions about No Hot Water — Water Heater Repair?

Several modern homes use an electrical hot water heater for their furnace, as a result of its benefit and also simplicity of use. Nonetheless, similar to any other electric appliances, troubles may arise with its usage, all of a sudden. It can be really frustrating to get up to a chilly shower instead of a warm one or having your bath with water that isn't hot sufficient or even as well warm. Whatever the situation may be, water heater problems can be fairly aggravating. The good news is, we've made a list of possible options to your hot water heater concerns. There are a number of elements that could trigger much of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety. Whatever the issue is, getting it fixed need to not posture way too much of an issue if you follow these steps:

 

Examine Your Power Supply:

As standard as this may seem, it is extremely required. Without ample power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power problem. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, just turn it on and off once more. Change any damaged or worn-out fuse. Test the home appliance with power after these adjustments to see if it's now functioning.

 

Inspect the Heating Element in the Hot Water Heater:

If it's not a power issue, after that try looking into your burner if it is still functioning. Check each of your heating elements to make sure the trouble isn't with any one of them. If any one of them is defective, replace that component and then inspect whether the warm water is back on.

 

Examine Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to check the temperature level settings on your upper thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the gain access to panel as well as press the red button for temperature level reset over the thermostat. This ought to help warm the water. Transform the circuit breaker back on as well as inspect if the problem has been resolved.

 

Call An Expert:

If after replacing all malfunctioning components and resetting your temperature, the water heater still isn't working, you might need to call a specialist plumber for an expert point of view. The issue with your heater could be that the cold and hot taps have been switched or it may be undersized for the quantity of warm water needed in your house. Whatever the instance might be, a professional plumber would help address the problem.

 

Conclusion

Hot water heater issues are not always major. Many of them result from small concerns like a blown fuse or worn-out burner. Replacing the malfunctioning components must do the trick. Nevertheless, if you are still not able to fix the problem, give a call to your nearby plumber ahead to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I hope you enjoyed our section about How to Troubleshoot and Repair an Electric Water Heater. Many thanks for finding the time to browse our short article. You should take a moment to distribute this entry if you enjoyed it. Thank you for going through it.

Need assistance? Call.